Table of Contents
Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
5. DAY & NIGHT
DAY/NIGHT is used to control the setting during day-time and night-time operation.
Select the mode according to the light condition and the camera types.
5-1. EXTERN
DAY or NIGHT is determined by the built-in light photo sensor.
5-2. AUTO
Used when DAY or NIGHT is determined by light level through the lens and
DAY from/to NIGHT is switched automatically by the scene brightness.
It can be controlled the AGC threshold level, AGC margin and delay time.
5-2-1. SMART IR (Available only with the built-in LED model)
: SMART IR can be set to reduce the saturation by the strong IR illumination
in the night in any menu of EXT, AUTO and B/W(NIGHT). Set to ON,
SMART IR is enabled and ANTI-SAT. level is controlled.
5-2-2. ANTI-SAT. (Available only with the SMART IR is ON)
: Sets the anti saturation level 0~20. Setting high level avoids the saturation
strongly but the corners will be darker accordingly.
5-2-3. AGC THRES
: AGC(Auto Gain Control) is a threshold level which determines to switch
DAY from/to NIGHT in AUTO mode. Higher value makes the camera switch
DAY from/to NIGHT at bright illumination.
MENU V0. XX
1. LENS
2. FOCUS ASt.
3. EXPOSURE
4. BACKLIGHT
5. DAY&NIGHT
6. COLOR
7. 3D-NR
8. IMAGE
9. MOTION
A. SYSTEM
B. EXIT
(This Camera model is not supported TDN by filter switcher.)
MANUAL
OFF
OFF
AUTO
MIDDLE
OFF
SAVE
16
Advertisement
Table of Contents
