MEGA-PIXEL NETWORK CAMERA
Installation Instructions
1. Drill three holes for mounting on the ceiling or wall.
2. Place the camera base at the pre-drilled installation position and fix it by using
mounting screws.
3. Route the power & ethernet cable to the connecting place.
4. Adjust the camera's viewing angle (Pan, Tilt, Rotation)
5. Assemble the camera body, ring cover and cover.
CAUTION
• Extreme care should be taken NOT to scratch the window surface while
the camera installing or adjusting.
• Care should be taken the cable is NOT to be damaged, kinked or exposed in
the hazardous area.
• Do not expose the camera directly to a strong light source such as the sun or
spot light.
Plastic Anchor
Mounting Screw
09
(6x30mm)
(4x35mm)