Table of Contents
Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
8-1. SHARPNESS
Sets the Sharpness level 0~10. Increases or decreases the sharpness of
the picture. Too much sharpness can make image harsh and show more
noise as well as line flicker at the edge of object in the picture.
8-2. GAMMA
Adjust gamma level of video.
8-3. MIRROR
The Video is reversed left and right if it turns ON.
8-4. FLIP
The Video is reversed upside down if it turns ON. When the video is fliped
by Vertical, then the joystick directions are reversed accordingly. It is very
useful when a camera in installed in upside
8-5. D-WDR
Improves the visibility for the high bright area and the dark area by compen-
sating the video gain. Care should be taken to select low, middle or high level,
because video may lose its quality in some environments by the over
compensation. Video noise can be increased in the dark area accordingly.
8-6. DEFOG
Enhance the foggy video according to status of scene. Video quality can be
less in normal environments. Sets AUTO or MANUAL mode.
8-6-1. MODE :
• AUTO : Enhance the foggy video automatically according to status of scene.
• MANUAL : Sets to enhance the foggy video manually regardless of status
of scene.
8-6-2. LEVEL : Sets Low, Mid or High.
Video quality can be less in normal environments.
8-7. PRIVACY
Sets ON/OFF for enabling/disabling PRIVACY mask. 16 privacy areas are
available and each area is programmable in size, color, position and
transparency.
8-7-1. ZONE NUM : Selects mask zone number from 0 to 15 to be adjusted.
8-7-2. ZONE DISP: Displays OFF/ON for the mask area which you selected zone.
8-7-3. H-POS, V-POS :
Adjusts the mask area H, V position which you selected zone.
20
Advertisement
Table of Contents
