Enable Eap On The Pc - Avaya 4000 Series Troubleshooting Instructions

Pinging the RADIUS server
About this task
Ping the RADIUS server to ensure connection exists.
Procedure
1. Use the ping <server IP> command to ensure connection.
2. Observe no packet loss to confirm connection.

Enable EAP on the PC

The PC must have an EAP-enabled device that is correctly configured.
Task flow: Enable EAP on the PC
About this task
The following task flow assists you to ensure the PC network card has EAP enabled.
Procedure
Figure 44: Enable EAP on the PC
Troubleshooting Avaya ERS 4000 Series
EAP client authentication
April 2014 123