Enabling Multicast Packets - Avaya 4000 Series Troubleshooting Instructions

Job aid
The following table describes the output of the show vlan igmp unknown-mcast-no-
flood command.
Allowed Multicast Addresses

Enabling multicast packets

About this task
Use this procedure to enable the multicast flooding.
Procedure
1. Use the unknown-mcast-allow-flood command to enable multicast flooding.
2. Observe the command output.
Troubleshooting Avaya ERS 4000 Series
Field
Multicast packets not flooding network
Description
Indicates the MAC addresses for which the
multicast traffic is not pruned when the option
igmp unknown-mcast-no-flood is enabled.
April 2014 207