Selecting The Forward Path Mode - Avaya 4000 Series Troubleshooting Instructions

Troubleshooting DHCP/BootP relay
Procedure
1. Enter the ip dhcp-relay fwd-path <interface address> <server
2. Ensure that the command completes.
Variable Definitions
interface address
server address

Selecting the forward path mode

About this task
Use the procedure in this section to configure the forward path mode.
Procedure
1. Enter the ip dhcp-relay fwd-path <interface address> <server
2. Ensure that the command completes.
Variable Definitions
interface address
server address
236 Troubleshooting Avaya ERS 4000 Series
address> enable command to enable the forward path.
Variable
address> mode [boot | dhcp | boot-dhcp] command to configure the
forward path mode.
Variable
Comments? infodev@avaya.com
Definition
IPv4 address of the interface
IPv4 address of the server
Definition
IPv4 address of the interface
IPv4 address of the server
April 2014