Avaya 4000 Series Troubleshooting Instructions page 145

Procedure
1. Enter the show eapol multihost interface <port#> command to display
2. Ensure that allow Non-EAPOL clients is enabled.
3. Ensure that the multihost status is enabled.
Enabling multihost status and allow non-EAPOL clients
About this task
Correct the non-EAP client attribute.
Procedure
1. Use the eapol multihost allow-non-eap-enable command to allow non-
2. Use the eapol multihost enable command to enable multihost status.
Showing EAPOL multihost non-eap-mac interface
About this task
Display the EAPOL multihost interface information.
Procedure
1. Enter the show eapol multihost non-eap-mac interface <port>
2. Note that the MAC address is in the list.
Ensuring MAC is in the list
About this task
Add the MAC address to the list if it was omitted.
Procedure
1. Use the show eapol multihost non-eap-mac status <port> command
Troubleshooting Avaya ERS 4000 Series
the information.
EAPOL clients.
command to display the information.
to view MAC addresses.
Configured MAC is not authenticating
April 2014 145