Dmx Values & Traits; Cad Drawing; Gobo Replacement; Adding A Color Gel - ADJ ikon profile ww User Instructions

DMX VALUES & TRAITS
Channel
1
2
3

CAD DRAWING

GOBO REPLACEMENT

The Ikon Profile WW gobo can be interchanged at any time and allows you to customize your system.
To replace gobo;
1. Gently slide the gobo housing out of the top of unit. The gobo housing is located in front of the top flag.
2. Once the gobo housing has been removed, remove the retaining ring that holds the gobo in. This can easily
be done using needle nose pliers.
3. Remove and replace the gobo with your desired replacement.
Reinsert the retainer ring, and make sure the ring rests firmly against the gobo.
4. Slide the gobo assembly back into place.

ADDING A COLOR GEL

A color gel (not included) can be added to the front of the Ikon Profile WW and can be interchanged at any
time. This allows you to customize your system.
To add a color gel;
1. Locate the color gel frame at the front of the unit. Slide the spring lever back and slide the gel frame out of
the holder.
2. Once the gel frame has been removed slide your desired color gel into the middle of the frame.
3. Slide the spring back and slide the gel frame into place.
A.D.J. Supply Europe B.V. – www.americandj.eu – Ikon Profile WW Instruction Manual
Value
0 - 7
8 - 15
16 - 131
132 - 139
140 - 181
182 - 189
190 - 231
232 - 239
240 - 247
248 - 255
0 - 255
0 - 20
21 - 40
41 - 60
61 - 80
81 - 100
101 - 255
Function
STROBING/SHUTTER
CLOSED
OPEN
STROBE SLOW - FAST
OPEN
FAST CLOSE - SLOW OPEN
OPEN
SLOW CLOSE - FAST OPEN
OPEN
RANDOM STROBE
OPEN
MASTER DIMMER 0% - 100%
DIMMER MODE
STANDARD
STAGE
TV
ARCHITECTURAL
THEATRE
DEFAULT DIMMER SETTING
Page 8