Settings; Seat Height; Adjusting Seat Height By Changing Rear Wheel Position; Settings Seat Height - Etac Prio Manual

Seat heigt may be adjusted by:
-Changing the position of the rear wheel.
-Changing the rear wheel size
The lower chair frame must always be horizontal. When
changing the seat height, the front height must also be
adjusted. See the"Adjusting front height" section.
Risk of tipping: Always check the setting of the
the anti-tips.

Adjusting seat height by changing rear wheel position

1. Remove the rear wheel
2. Unscrew the nut.
3. Reassemble in desired position (see table in sec-
tion "Seat height table").
4. Adjust the castor wheel/front fork so that the
lower part of the chair frame is horizontal (see
section"Adjusting front height").
1
2

6. Settings

Seat height

5. Adjust the user brake, see section "Brake, adjust-
ment".
Risk of tipping: Always check the setting of the
the anti-tips.
3
20", 22", 24"
16"
11
Etac / Prio / www.etac.com
17 mm
14 Nm
24 mm