Brake, adjustment
The brakes are infinitely settable.
1. Loosen the screw a couple of turns.
2. Set the brake in correct position.
3. The brake block should be 15-20 mm from the
tyre when the brake is not applied.
1
5 mm
4
Adjusting the brake block
1
7. Readjustments
2
5
2
5 mm
4. Ensure that the brake is straight in the groove
and tighten the nut. Test the brakes.
5. Ensure the nut locks in the steel plate on the
inside.
The brakes are parking brakes and should not
be applied during use.
3
39
Etac / Prio / www.etac.com
3
15-20 mm
12 Nm