Table of Contents
Advertisement
Etac / Prio / www.etac.com
Foot supports
Adjust the height until you are sure that your feet are
supported and your thighs are resting on the cushion.
For outdoor use the foot supports should be raised
4-5 cm above the ground.
Adjusting the angle
Adjust the foot support angle, so the ankles are at
90°.
Calf/heel strap
•
Adjust the length so that your insteps rest on the
foot supports.
Arm supports (adjustment)
•
Loosen the screws on the inside of the arm support
plate.
•
Set the required height and tighten the screw.
User manual
Settings seat comfort
Adjusting the height
Loosen the knob and pull out the screw. Set the
height. Assemble the screw and knob and tighten
firmly.
5 mm
•
Loosen the screws underneath the arm support
cushion to adjust the cushion in length.
•
The high position of the arm supports relieves pres-
sure on the back and supports better than a lower
position.
26
Never stand on the foot
supports as there is a risk
of tipping!
4 mm
Advertisement
Chapters
Table of Contents
