Adjusting Front Seat Height By Changing Castor Wheel/Front Fork; Fitting Front Fork - Etac Prio Manual

Etac / Prio / www.etac.com

Adjusting front seat height by changing castor wheel/front fork

See section "Adjusting front height by changing
position of castor wheel" and "Seat height table".
Risk of tipping: Always check the setting of the
the anti-tips.

Fitting front fork

1. Remove the nut cover and dismantle/mount the
front fork with castor wheel as in illustration.
NB! It is also important to ensure that the ball
bearings and washers in the attachment (under the
retaining nut) are placed in the right order, with the
spring washer on top.
When mounting, tighten the retaining nut as far
as possible and then loosen ½ – 1 turn. The spring
washer then has the correct tension and reduces
the risk of the castor wheels starting to "wobble".
6. Settings
Risk of tipping: Always check the setting of the
the anti-tips.
19 mm
14