Settings; Front Seat Height; Adjusting The Front Seat Height By Using The Front Fork Attachment; Adjusting The Front Seat Height By Changing The Position Of The Castor Wheel - Etac Cross 5 Manual

Etac / Cross 5 / www.etac.com
The front seat height may be adjusted by:
- Using the front fork attachment, adjustable in
height and angle.
-Changing the position of the castor wheel.
-Changing the front fork.
-Changing the castor
Risk of tipping: Always check the setting of the
the anti-tips.

Adjusting the front seat height by using the front fork attachment

Loosen the screws (A and B). Set the desired seat
height by measuring from the floor to the seat
upholstery and tighten the screws on one front fork
mounting. Use the position markings as a reference
for adjusting the height on the other side. Tighten
the other mounting. Check and adjust so that the
mountings are perpendicular. (See section 'Angle
A
B

Adjusting the front seat height by changing the position of the castor wheel

See also section "Front seat height table".
5 mm

5. Settings

Front seat height

setting of front fork mounting'.) Fine-tune the height
of the front fork mountings so that both wheels are
flush with the floor.
± 1,5 cm
12
Risk of tipping: Always check the setting of the
the anti-tips.
Risk of tipping: Always check the setting of the
the anti-tips.
6 mm
20Nm