Tests And Guarantees - Etac Prio Manual

Crash test:
Etac's wheelchairs are tested in accordance with ISO 7176-19.
They are crash tested at the Technical Research Institute of
Sweden. The tests were carried out with an UNWIN_WWR/
ATF/K/R restraining device and a 907523, Klippan Safety AB
3-point seat belt.
Service life:
The product is tested and fulfils the demands stated in EN
12183. The main product's durability and lifetime is at least five
years when used in accordance with intended use, the safety
instructions, the reconditioning manual and instructions for
use in the user manual. The main product consists of the chas-
sis for seat and back support. Additional parts/accessories are
handled in accordance with the manual and reconditioning
manual. The actual lifetime can vary, depending on how much
and how intensively the product is being used, but a maximum
of 10 years. If the product is intended for use after the service
life period specified by Etac, it is the responsibility of the prod-
uct owner to ensure product functionality in accordance with
the manual and reconditioning instructions. If this cannot be
ensured then the product should be taken out of use.
Methods of surface treatment:
Lacquered surfaces = Polyester powder coating or ED-coating
Non-lacquered aluminium parts = Anodized coating
Non-lacquered steel surfaces = Galvanized

11. Tests and Guarantees

47
CE marking:
The product has passed all tests and met all criteria set by
European standards for specific product groups. Combination
agreements exist, see www.etac.com.
Guarantee:
5 year guarantee against material and manufacturing defects.
For terms and conditions, see www.etac.com.
Special adaptations:
comprise everything that falls outside the instructions and set-
tings in this Manual. Wheelchairs specially adapted by customers
are not eligible for Etac's CE marking. Etac's guarantee no longer
applies. If in the least doubt about the validity of adjustments,
please contact Etac for advice.
If wheelchair is combined with another product not manufactu-
red by Etac, neither of the products will retain their CE marking
unless combination agreement exists. Please contact Etac for
up-to-date information.
To be sorted according to national regulations.
Etac / Prio / www.etac.com