Seat Depth - Etac Prio Manual

8. Screw the gas spring in place according to the
"Screw positions for seat depth" diagrams. Do
not forget the washer in between. NOTE! If fitted
into the wrong hole, the backrest adjustment will
not function correctly.
9. Raise the chair up and remove the Allen key used
to lock the backrest angle.
10. Fit the seat plates according to the "Screw
positions for seat depth" diagrams. Start with
the rear seat plate.
8
9
10
6. Settings

Seat depth

11. Fit rear wheels, armrest and seat cushion.
12. Engage the anti-tips and check the seat and
back angling function.
Risk of tipping: Always check the setting of the
the anti-tips.
35
Etac / Prio / www.etac.com
1
2