Settings (Cont.); Seat Depth - Etac Prio Manual

The seat depth can be set to three fixed positions by
repositioning the back chassis and rear seat plate.
1. Tilt the backrest upwards.
2. Tilt the seat as far back as possible and remove
the seat cushion.
3. Lift the seat plates off by loosening the screws on
the bottom of the seat chassis.
4. Twist the anti-tips to one side.
1
3
6. Settings

Seat depth

Risk of tipping: Always check the setting of the
the anti-tips.
2
33
Etac / Prio / www.etac.com
5 mm
4