Leg Support Elevating - Etac Prio Manual

Etac / Prio / www.etac.com

Leg support elevating

The calf support is adjustable in height and depth.
1. Loosen the screw, set the height of the calf sup-
port and tighten.
2. Loosen the screw holding the calf support.
3. Pull out the screw and set the depth.
4. Fit the screw and tighten.
1
3
7. Readjustments
2
40
Never stand on the foot plates as there is a risk
of tipping!
Never lift the chair by the leg supports
Always have the screw and knob for foot sup-
port attached even if not using foot support.
4
5 mm