Com1~4: Serial Ports; Isolated Com Port Interface (Com1, Com2, Com3, Com4); Lan: Ethernet Connector; Power Connector - Advantech UNO-1372G-J User Manual

2.2

COM1~4: Serial Ports

The UNO-1372G-J equips four standard isolated COM serial communication ports:
COM1, COM2, COM3, COM4.
2.2.1

Isolated COM Port Interface (COM1, COM2, COM3, COM4)

UNO-1372G-J equips 4 x RS-232/422/485 ports, DB9, 50~115.2kbps. The default
setting of COM1~4 is RS-232. The setting can be adjusted via switches on board
(Refer to Appendix A.7).
2.3

LAN: Ethernet Connector

UNO-1372G-J is equipped with a two Gigabit LAN controller. The controller chip used
is an Intel i210 Ethernet controller that is fully compliant with IEEE 802.3u 10/100/
1000 Base-T. The Ethernet port is a standard RJ-45 jack, and LED indicators are on
the front to show its Link (off/ Green/ Orange LED) and Active (Green LED) status
(Refer to Appendix A.10).
2.4

Power Connector

UNO-1372G-J comes with a Phoenix connector that carries 10 - 36 V
power input, and features reversed wiring protection. Therefore, it will not cause any

Figure 2.2 Top view of UNO-1372G-J

7
external
DC
UNO-1372G-J User Manual