Fuji Electric FRN0001C2S-2A FRN0002C2S-2A FRN0004C2S-2A FRN0006C2S-2A FRN0010C2S-2A FRN0012C2S-2A FRN0020C2S-2A FRN0025C2S-2A FRN0033C2S-2A FR Instruction Manual page 3

Thank you for purchasing our FRENIC-Mini series of inverters.
This product is designed to drive a three-phase induction motor and three-phase permanent magnet
synchronous motor (PMSM). Read through this instruction manual and be familiar with proper
handling and operation of this product.
Improper handling might result in i.ncorrect operation, a short life, or even a failure of this product as
well as the motor.
Have this manual delivered to the end user of this product. Keep this manual in a safe place until this
product is discarded.
Listed below are the other materials related to the use of the FRENIC-Mini. Read them in conjunction
with this manual as necessary.
• FRENIC-Mini User's Manual
• RS-485 Communication User's Manual
• Catalog
The materials are subject to change without notice. Be sure to obtain the latest editions for use.
We plan to make the latest edition of the User's Manual available for download from the following
URL:
(URL) https://felib.fujielectric.co.jp/download/login.htm?site=global&lang=en
Japanese Guideline for Suppressing Harmonics in Home Electric and Gen-
eral-purpose Appliances
Fuji three-phase 200 V class series of inverters with a capacity of 3.7 kW (5 HP) or less, sin-
gle-phase 200 V class series with 2.2 kW (3 HP) or less, and single-phase 100 V class series with
0.75 kW (1 HP) or less were once subject to the "Japanese Guideline for Suppressing Harmonics in
Home Electric and General-purpose Appliances" (established in September 1994 and revised in
October 1999), published by the Ministry of International Trade and Industry (currently the Ministry of
Economy, Trade and Industry (METI)).
Since the revision of the guideline in January 2004, however, these inverters have no longer been
subject to the guideline. The individual inverter manufacturers have voluntarily employed harmonics
suppression measures.
As our measure, it is recommended that DC reactors (DCRs) authorized in this manual be con-
nected to the FRENIC-Mini series of inverters.
When using DCRs not authorized in this manual, however, consult your Fuji Electric representative
for the detailed specifications.
Japanese Guideline for Suppressing Harmonics by Customers Receiving
High Voltage or Special High Voltage
Refer to the FRENIC-Mini User's Manual (24A7-E-0023), Appendix C for details on this guideline.
Preface
(24A7-E-0023)
(MEH448)
(24A1-E-0011)
i