Keypad (Menu Display Mode); Built-In Potentiometer (Function Selection) - Fuji Electric FRN0001C2S-2A FRN0002C2S-2A FRN0004C2S-2A FRN0006C2S-2A FRN0010C2S-2A FRN0012C2S-2A FRN0020C2S-2A FRN0025C2S-2A FRN0033C2S-2A FR Instruction Manual

E52

Keypad (Menu display mode)

E52 provides a choice of three menu display modes for the keypad as listed below.
Data for E52
0
1
2
Selecting the full-menu mode (E52 = 2) allows you to cycle through the menus with
the
menu has been cycled through, the display returns to the first menu item.
E60

Built-in Potentiometer (Function selection)

E61
Terminal [12] Extended Function
E62
Terminal [C1] Extended Function
E60 through E62 define the property of the built-in potentiometer and terminals [12] and [C1],
respectively.
There is no need to set up the potentiometer and terminals if they are to be used for frequency
command sources.
Data for E60,
E61, or E62
0 None
Auxiliary frequency
1
command 1
Auxiliary frequency
2
command 2
3 PID command 1
5 PID feedback amount
If the built-in potentiometer and different terminals have been set up to have the
same data, the operation priority is given in the following order:
Selecting the UP/DOWN control (F01, C30 = 7) ignores auxiliary frequency
command 1 and 2.
Menu display mode
Function code data editing mode
Function code data check mode
Full-menu mode
* Menus #1 through #7 when a remote keypad is connected.
or key and select the desired menu item with the
Function
E60 > E61 > E62
Description
This is an auxiliary analog frequency input to be added to
frequency command 1 (F01). It is never added to
frequency command 2, multistep frequency command or
other frequency commands.
This is an auxiliary analog frequency input to be added to
all frequency commands including frequency command
1, frequency command 2 and multistep frequency
commands.
This input includes temperature, pressure or other
commands to apply under the PID control.
Function code J02 should be also configured.
This input includes the feedback of the temperature or
pressure under the PID control. (Not available for E60.)
5-63
Menus to be displayed
Menu #1
Menu #2
Menus #1 through #6 *
key. Once the entire
--