Block External Sites - Watchguard Firebox SOHO 6 Wireless User Manual

6 Click Add.
The following steps determine how the service is filtered.
Select Allow or Deny from the Incoming Filter and Outgoing
7
Filter drop-down lists.
8 Select Host IP Address, Network IP Address, or Host Range
from the drop-down list at the bottom of the page.
The Custom Service page refreshes.
9 Type a single host IP address, a network IP address, or the start
and end of a range of host IP addresses in the address field.
10 Click Add.
Repeat the previous three steps until all of the address information for this
custom service is set.
11 Click Submit.

Block external sites

The default configuration of the SOHO 6 Wireless:
• allows the transmission of all packets from the trusted
network to the external network;
• prevents the transmission of all packets from the external
network to the trusted network.
You can change the configuration to prevent access to specified
Internet sites. Follow these steps to configure the blocked sites:
1 From the navigation bar on the left side, select
Firewall => Blocked Sites.
The Blocked Sites page opens.
User Guide
Block external sites
75