Set Up Logging To A Watchguard Security Event Processor Log Host - Watchguard Firebox SOHO 6 Wireless User Manual

Set up logging to a WatchGuard Security Event Processor log host

The newest entry is shown at the top of the event log.
This option synchronizes the clock of the SOHO 6 Wireless to your
computer:
• Click Sync Time with Browser now.
The SOHO 6 Wireless synchronizes the time at startup.
Set up logging to a WatchGuard Security
Event Processor log host
The WSEP (WatchGuard Security Event Processor) is an
application that is available with the WatchGuard Firebox System
package used by a Firebox II/III. The WSEP application runs on a
computer that functions as the log host. The WSEP application
records log messages sent from the Firebox II/III. If you have a
Firebox II/III, configure the WSEP to accept the log messages from
your SOHO 6 Wireless. Then follow these instructions to send
your event logs to the WSEP.
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless:
The default IP address is: http://192.168.111.1
2 From the navigation bar on the left side, select
Logging => WSEP Logging.
The WatchGuard Security Event Processor page opens.
User Guide
N
OTE
87