Connect And Disconnect The Muvpn Client - Watchguard Firebox SOHO 6 Wireless User Manual

If you wish to disregard these settings, delete the contents.
8 When the computer has restarted, select Start => Programs.
9 Right-click Mobile User VPN and select Delete to remove this
selection from your Start Menu.

Connect and Disconnect the MUVPN Client

The MUVPN client enables the remote computer to establish a
secure, encrypted connection to a protected network over the
Internet. To do this, you must first connect to the Internet and then
use the MUVPN client to connect to the protected network.
Connecting the MUVPN Client
1 First establish an Internet connection through either Dial-Up
Networking or directly through a local area network (LAN) or
wide area network (WAN).
From the Windows desktop system tray:
2 Verify the MUVPN client status–it must be activated. If it is
not, right-click the icon and select Activate Security Policy.
For information on how to determine the status of the MUVPN icon, see
the following section "The Mobile User VPN client icon".
Then, from the Windows desktop:
Select Start => Programs => Mobile User VPN => Connect.
3
The WatchGuard Mobile User Connect widow appears.
4 Click the Yes button.
User Guide
Connect and Disconnect the MUVPN Client
147