Watchguard Firebox SOHO 6 Wireless User Manual page 162

4 Click to select the Secure option.
This is the default setting.
5 Click to select the Only Connect Manually checkbox.
6 Select the IP Subnet option from the ID Type drop list.
The Remote Part Identity and Addressing settings refresh to display the
appropriate fields.
7 Type the network IP Address of the Trusted Network behind
the SOHO 6 Wireless in the field labeled "Subnet".
8 Type the Subnet Mask of the Trusted Network behind the
SOHO 6 Wireless in the field labeled "Mask".
9 Select All from the Protocol drop list.
This is the default setting.
10 Click to select the Connect using checkbox and select Secure
Gateway Tunnel from the drop list.
11 Select IP Address from the ID Type drop list and then type the
IP address of the External interface in the available field.
Defining the My Identity settings
Follow these instructions to define the My Identity settings.
1 From the Network Security Policy field, expand the new entry.
The My Identity and Security Policy entries appear.
140 WatchGuard Firebox SOHO 6 Wireless