Watchguard Firebox SOHO 6 Wireless User Manual page 146

• An Internet Service Provider account
• A Dial-Up or Broadband (DSL or Cable modem) Connection
Additionally, in order for Windows file and print sharing to occur
through the MUVPN client tunnel each Windows operating
system must have the proper components installed and configured
to use the remote WINS and DNS servers on the trusted and
optional networks behind the Firebox.
You can not use the MUVPN client virtual adapter. Make sure this is
disabled.
Windows 98/ME operating system setup
The following networking components must be configured and
installed on a remote computer running Windows 98/ME in order
for the MUVPN client to function properly.
Configuring networking names
From the Windows desktop:
1 Select Start => Settings => Control Panel. Double-click the
Network icon.
The Network window appears.
2 Verify that the Client for Microsoft Networks is installed.
If Client for Microsoft Networks is not installed, you
instructions, see the following section, "Installing the Client for Microsoft
Networks".
3 Click the Identification tab.
4 Type a name for the remote computer.
must
This be a unique name on the remote network.
5 Type the domain name you are connecting to.
This should be the same as the Logon to Windows NT domain value.
124
N
OTE
WatchGuard Firebox SOHO 6 Wireless
must
install it. For