Watchguard Firebox SOHO 6 Wireless User Manual page 45

3 Disconnect the Ethernet cable that connects your DSL modem,
cable modem or other Internet connection to your computer.
Connect this cable to the WAN port on the SOHO 6 Wireless.
The SOHO 6 Wireless is connected directly to the modem or other Internet
connection.
4 Connect one end of the straight-through Ethernet cable
supplied with your SOHO 6 Wireless to a trusted network port
(0-3) on the SOHO 6 Wireless. Connect the other end to the
Ethernet port of your computer.
The SOHO 6 Wireless is connected to the Internet and your computer.
5 If you connect to the Internet through a DSL modem or cable
modem, reconnect the power supply to this device. The
indicator lights flash and then stop. The modem is ready for
use.
6 Attach the AC adapter to the SOHO 6 Wireless. Connect the AC
adapter to a power source.
7 Restart the computer.
See "Factory default settings" on page 31 for the factory default
configuration options. See "External Network Configuration" on
page 37 and "Configure the Trusted Network" on page 42 for
special configurations.
Cabling the SOHO 6 Wireless for more than four
appliances
Although the SOHO 6 Wireless has only four trusted network
ports (0-3), you can connect more than four appliances. Use one or
more network hubs to make more connections.
User Guide
Physically Connect to the SOHO 6 Wireless
23