Watchguard Firebox SOHO 6 Wireless User Manual page 111

Follow these steps to configure a Syslog Host:
1 Type the IP address of the trusted network in your browser
window to connect to the System Status page of the SOHO 6
Wireless:
The default IP address is: http://192.168.111.1
2 From the navigation bar on the left side, select
Logging => Syslog Logging.
The Syslog Logging page opens.
3 Set the Enable syslog output check box.
4 Type the IP address of the Syslog server.
In the illustration, the IP address is 206.253.208.100.
5 Click Submit.
This option includes the local time from your browser in the Syslog
messages:
• Select Include local time in Syslog message.
Syslog traffic is not encrypted. Syslog messages that are sent through the
Internet decrease the security of the trusted network. Use a VPN tunnel
to increase the security of Syslog message traffic. If the Syslog messages
User Guide
Set up logging to a Syslog host
N
OTE
89