CHAPTER 2
The SOHO 6 Wireless protects computers that are connected to it
by Ethernet cable or wireless connection. Follow the procedures in
this chapter to install the SOHO 6 Wireless and set up the wireless
network.
Because WatchGuard is concerned about the security of your
network, the wireless feature is turned off on the SOHO 6 Wireless
we ship you. This allows you to enable the wireless network after
you set up the desired security.
To install the SOHO 6 Wireless, you complete the following steps:
• Identify and record your TCP/IP settings.
• Disable the HTTP proxy setting of your Web browser.
• Enable your computer for DHCP.
• Make the physical connections between the SOHO 6
Wireless and your network.
User Guide
Installation
13