Watchguard Firebox SOHO 6 Wireless User Manual page 157

Installing the Client for Microsoft Networks
From the Windows desktop:
1 Select Start => Control => Network Connections, then select the
connection you use to access the Internet.
The connection window appears.
2 Click the Properties button.
3 Select the Networking tab and then click the Install button.
The Select Network Component Type window appears.
Double click the Client network component.
4
The Select Network Protocol window appears.
5 Select the Client for Microsoft Networks Network Client and
then click the OK button.
6 Click the Cancel button to close the Select Network
Component Type window.
7 Click the OK button to preserve the installed components.
8 Click the Cancel button to close the Dial-up connection
window.
Configuring the WINS and DNS settings
You must configure the remote computer to use the WINS and
DNS servers of the trusted network behind the Firebox.
From the Windows desktop:
1 Select Start => Control Panel => Network Connections, then
select the Dial-up connection you use to access the Internet.
The connection window appears.
2 Click the Properties button.
3 Click the Networking tab.
4 Select the Internet Protocol (TCP/IP) component, then click the
Properties button.
The Internet Protocol (TCP/IP) Properties window appears.
User Guide
Prepare the Remote Computers for the MUVPN Client
135