Watchguard Firebox SOHO 6 Wireless User Manual page 153

3 Select the Networking tab and then click the Install button.
The Select Network Component Type window appears.
4 Double click the Services network component.
The Select Network Service window appears.
5 Select the File and Printer Sharing for Microsoft Networks
Network Service and then click the OK button.
Installing the Client for Microsoft Networks
From the Windows desktop:
Select Start => Settings => Network and Dial-up Connections,
1
then select the Dial-up connection you use to access the
Internet.
The connection window appears.
2 Click the Properties button.
3 Select the Networking tab and then click the Install button.
The Select Network Component Type window appears.
4 Double click the Client network component.
The Select Network Protocol window appears.
Select the Client for Microsoft Networks Network Client and
5
then click the OK button.
6 Click the Cancel button to close the Select Network
Component Type window.
7 Click the OK button to preserve the installed components.
Click the Cancel button to close the Dial-up connection
8
window.
Configuring the WINS and DNS settings
You must configure the remote computer to use the WINS and
DNS servers of the trusted network behind the Firebox.
User Guide
Prepare the Remote Computers for the MUVPN Client
131