What You Need - Watchguard Firebox SOHO 6 Wireless User Manual

What You Need

• One WatchGuard SOHO 6 Wireless with VPN and one
IPSec-compatible appliance.
IPSec-compatible appliances include the WatchGuard SOHO 6 Wireless,
the WatchGuard Firebox II/III, and the Firebox Vclass.
• The data from your ISP about the Internet connections for
each of the two IPSec-compatible appliances:
- Static IP address
- Primary DNS IP address (optional)
- A secondary DNS address (optional)
- Domain name (optional)
• The network addresses and subnet masks for the two trusted
networks. The default IP address for the SOHO 6 Wireless
trusted network is 192.168.111.0. The default subnet mask for
the SOHO 6 Wireless trusted network is 255.255.255.0.
The trusted networks at the two ends of the VPN tunnel must have
different network addresses.
If the appliances that connect through the VPN tunnel are not
configured correctly, the VPN tunnel does not function.
WatchGuard recommends that you make a record of the
configuration information in the format shown below.
106
N
OTE
N
OTE
WatchGuard Firebox SOHO 6 Wireless