Defining The Security Policy Settings - Watchguard Firebox SOHO 6 Wireless User Manual

4 Click to select the Secure option.
This is the default setting.
5 Click to select the Only Connect Manually checkbox.
6 Select the IP Subnet option from the ID Type drop list.
The Remote Part Identity and Addressing settings refresh to display the
appropriate fields.
7 Type 0.0.0.0 in both the Subnet and Mask fields.
These are the default values.
8 Select All from the Protocol drop list.
This is the default setting.
9 Click to select the Connect using checkbox and select Secure
Gateway Tunnel from the drop list.
10 Select IP Address from the ID Type drop list and then type the
IP address of the Optional interface in the available field.

Defining the Security Policy settings

Follow these instructions to define the Security Policy settings.
1 From the Network Security Policy field, select Security Policy.
The Security Policy settings appear to the right.
User Guide
Use the MUVPN Client to Enforce your Corporate Policy
161