Armrests - Otto Bock ParaGolfer Instructions For Use Manual

Operation
The height of the backrest can be adjusted by 80 mm / 3.15".
To do so, loosen the clamps on the right and left backrest
tube using the clamping levers (see fig. 9 a). Then the back-
rest can be moved up and down along the tube. Make sure
to move the backrest evenly with both hands and do not
skew (see fig. 9 b). Do not forget to firmly retighten the
clamping levers after adjustment.
In the same way, the backrest can be pulled off completely
for transportation purposes.
Fig. 9 a Loosening the clamps
36 | Ottobock
Fig. 9 b Adjusting the backrest height

6.1.5 Armrests

WARNING
Risk of injury due to tipping out of the wheelchair. To
change the seat depth setting you first have to move the
seat from the sitting position into the standing position. If
you make the adjustment while the user is sitting in the
wheelchair, all belts must be fastened first (see sec-
tion 6.3).
ParaGolfer