Change Configurations - Tally Dascom 5130P User Manual

Tally Dascom 5130P
Configuration Profiles
The termination of Listing Current Configuration brings the Edit Profile menu.
Successive pressing of USER2 scrolls out remaining choices, highlighted in
Edit Profile: Menu1 Menu2 Restore Factory Defaults
NOTE: Menu1 and Menu2 cannot assign the same I/F.
Menu1=Profile for USER1; Menu=Profile for USER2.
How to Change Current Configurations
The configuration (emulation, I/F and so on) for each profile is carried out in a Q&A session with the below
keys assignment. The same key assignment applies universally to the offspring of individual menu.
Keys for Setup
[USER1]=OK
"OK" implies accepting the latest printed item (a menu selection or a parameter)
"Next" requests for printing next item
"Exit" immediately leaves the current menu or parameter setting
In parameters menus, the press of OFFLINE prompts: Save setting?
Press USER1 to save the settings collectively with a beep.
Press of USER2 appends a "NO" to the "OK"; then press USER1 to exit without saving.
[USER2]=Next [OFFLINE]=Exit
brown.
[USER1]=OK [USER2]=Next
OK
28