Inserting A Passbook; Tractor Feed Handling - Tally Dascom 5130P User Manual

Tally Dascom 5130P

Inserting a passbook

1. Power on the printer. After initialization, only the "ON" LED should remain on.
2. While pressing the center seam and with printable side facing up, insert a passbook into the paper loader
until the edge of the passbook engages snugly with the platen. The passbook should advance
automatically to the print position. Now the printer is ready to print as shown below.
Tractor Feed Handling (for Tractor version)
1. Move the paper-feed lever to "
2. Raise the tractor doors and fit the first 3 paper holes onto the left tractor pins. Close the left tractor door. In
the same way, install the paper on the right tractor.
3. Adjust the right tractor to the width of the paper until the paper is flat. Do not stretch the paper too taut.
Push the right lock lever down to secure the right tractor in place.
4. Press the【Load/Eject】key to load the paper to the starting print position. The printer is now ready to print
in the online state.
" for continuous paper position.
20