Table of Contents
Advertisement
is accidentally connected to a cable carrying a voltage greater than
approximately 10V, a warning tone will be emitted and the instrument
display will show "Voltage Detected". Testing will be inhibited and
the operator should immediately disconnect the unit from the cable.
The CX10/CX10+ has been manufactured in accordance
with and meets the requirements of the following standards:
• SAFETY IEC 61010-1 and EN 60950
• EMC BS/EN 61326-1
• EMC EN50081 and EN50082 Light Industrial
• Water/Dustproof to IP54
3. Basic Operation
3.1 Keypad
The unit is powered on and off from the red key on the
keyboard area. In order to turn off the unit, press the power
key for at least 2 seconds. If the unit is not responding,
holding the power key down by more than 10 seconds will
force the unit to power down.
6
Voltage Safety Warning: If the CX10/CX10+
The keypad comprises the
following keys:
LCD display
Navigation down/up
Toggle key
TDR
Power On/Off
CX10/CX10+ D07-00-036 Rev.B01
Advertisement
Table of Contents
