Uponor Smatrix Base Installation And Operation Manual page 85

Select scheduling program
To select a scheduling program:
1. Press OK to enter parameter edit mode.
2. Use buttons - or + to select program.
Select between: P1–P6, U (user defined program)
and Off.
3. Press OK to confirm program selection and return
to the settings menu.
Customise user defined program for a single day
To customise the user defined program:
1. Press OK to enter parameter edit mode.
2. Use buttons - or + to select program U.
3. Press OK to confirm program selection.
The current day starts flashing.
4. Use buttons - or + to select a day.
5. Press and hold OK until 00:00 appears on the
display (takes about 2 seconds).
6. Press OK to switch the marked interval between
Comfort ( ) and ECO mode (
7. Use buttons - or + to move the marker (at the
bottom of the display). When moving the marker
from one interval to another save the selected mode
to that interval.
8. Repeat steps 6 and 7 until the display shows 23:30.
9. Press + to finalize the current day and the software
exits to the settings menu.
10. Repeat from step 1 to customise another day.
U P O N O R S M AT R I X B A S E / B A S E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
).
Customise user defined program for a full week
NOTE! This method resets the current user defined
program to factory defaults.
To customise the user defined program:
1. Press OK to enter parameter edit mode.
2. Use buttons - or + to select program U.
3. Press and hold OK until day 1 and 00:00 appears
on the display.
6. Press OK to switch the marked interval between
Comfort ( ) and ECO mode (
7. Use buttons - or + to move the marker (at the
bottom of the display). When moving the marker
from one interval to another save the selected mode
to that interval.
8. Repeat steps 6 and 7 until the display shows 23:30.
9. Press + to finalize programming the current day.
The text Copy Yes appears (Yes is flashing).
10. Use buttons - or + to select Yes or No and press
OK to confirm.
Select Yes to copy the setting of the current day
to the next. Repeat for every day that should be
identical.
Select No and press OK to create a new scheduling
interval for the following day. Then repeat steps 6
through 10 until the whole week is programmed.
11. The display returns to the settings menu when the
final day is done.
UK
CZ
DE
DK
EE
).
ES
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
8 5