Uponor Smatrix Base Installation And Operation Manual page 12

UK
t
hermostats
The thermostats communicate with the controller by
CZ
a wired communication protocol and are used either
individually or in combination with each other.
The following Uponor Smatrix thermostats can be used
DE
in the system:
Thermostat
DK
D+RH T-149
Prog.+RH T-148
EE
Digital T-146
Standard T-145
Flush T-144
ES
Public T-143
Sensor T-141
FI
* With reduced functionality
N O T E !
FR
The thermostat is affected by the
temperature of the surrounding surfaces as
well as the ambient air temperature.
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
1 2
Base PRO Base
X* X*
X* X*
X* X*
X X
X X
X X
X –
U P O N O R S M AT R I X B A S E / B A S E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
Uponor Smatrix Base Thermostat D+RH Style
T-149
The thermostat shows the ambient, set temperature or
relative humidity on the display. Temperature settings
are adjusted using the +/- buttons on the front.
Main characteristics:
• Power saving e-paper display (updates every 10
minutes).
• Displays Celsius or Fahrenheit.
• Operative sensor for increased comfort.
• Calibration of displayed room temperature.
• Heating/cooling demand indication on display.
• Displays Uponor logo and software version during
power up sequence.
• Setpoint range is 5 – 35 °C (maximum and
minimum setting may be limited by other system
settings).
• Room temperature regulation with use of optional
external temperature sensors.
• Displays optional temperature sensor values
if sensors are connected and relevant room
temperature regulation is activated.
• Switch between Comfort and ECO mode with
optional timer.
• Adjust ECO setback value.
• Relative humidity limit indicated in display.
• Invert display color.
Components of the thermostat:
The illustration below shows the thermostat and its
components.
A B
Item Description
A Uponor Smatrix Base Thermostat D+RH Style T-149
B Metal wall bracket
C Mounting material
C