Uponor Smatrix Base Installation And Operation Manual page 15

Uponor Smatrix Base Thermostat Flush T-144
The thermostat temperature settings are adjusted using
the dial. The 21°C position is marked on the dial.
Main characteristics:
• Flush installation, specially designed for in-wall box
installation.
• Adjust temperature setpoint with large dial.
• Printed scale on the dial.
• Setpoint range is 5 – 35 °C (maximum and
minimum setting may be limited by other system
settings).
• LED indicating, for about 60 seconds, whether a
heating or cooling demand exists.
• Enable or disable Comfort/ECO scheduling for the
room with a dip switch beneath the dial, which have
to be removed for access.
• Different frames can be used for installation in a
switch rail frame.
Components of the thermostat:
The illustration below shows the thermostat and its
components.
A
Item Description
A Uponor Smatrix Base Thermostat Flush T-144
B Mounting material
U P O N O R S M AT R I X B A S E / B A S E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
B
Uponor Smatrix Base Thermostat Public T-143
The thermostat is designed for public locations which
means that the dial is hidden. It must be removed from
the wall to set the temperature. When it is removed, an
alarm is triggered (if activated).
The thermostat can be registered as a system device,
enabling extra functions. When functioning as a system
device, the internal room sensor is disabled.
Main characteristics:
• Adjust setpoint temperature with a potentiometer
on the back of the thermostat.
• Setpoint range is 5 – 35 °C (maximum and
minimum setting may be limited by other system
settings).
• Alarm is indicated on the controller if removed from
wall for tamper detection (activated at registration).
• Dry contact input for forced ECO mode of
operation, if registered as a system device.
• Optional external temperature sensor can be
connected to the thermostat.
• Optional outdoor temperature sensor can be
registered as either standard thermostat or system
device.
• Dip switch for selecting between function or sensor
mode of operation.
• Enable or disable Comfort/ECO scheduling for the
room with a dip switch on the back.
Components of the thermostat:
The illustration below shows the thermostat and its
components.
A B
Item Description
A Uponor Smatrix Base Thermostat Public T-143
B Wall bracket
C Connection terminals
D Mounting material
UK
CZ
DE
DK
EE
ES
FI
FR
HR
HU
IT
LT
LV
NL
C
D
NO
PL
PT
RO
RU
SE
SK
1 5