Uponor Smatrix Base Installation And Operation Manual page 10

UK
Uponor Smatrix Base Controller X-145
Main characteristics:
CZ
• Integrated Dynamic Energy Management functions
such as autobalancing (on by default).
DE
• Electronic control of actuators.
• Connection of maximum eight actuators (24 V).
DK
• 2-way communication with up to six room
thermostats.
EE
• Heating/cooling function (basic) switched by dry
contact.
• Separate relays for control of pump and boiler.
ES
• Valve and pump exercise.
• Basic relative humidity control.
FI
• Lower indoor temperature with ECO mode. Use a
timer I-143, interface I-147, or public thermostat
FR T-143 (with Comfort/ECO switch) to activate ECO
mode in all rooms at once. Use a digital thermostat
T-148 to activate ECO mode in a single room.
HR
Options:
• The controller can be expanded with a slave module
which adds an extra six channels and six actuator
HU
outputs.
• The controller can be expanded with a star module
IT
which adds eight extra bus connectors to the
system. It can be connected to the controller or
slave module and is mostly used for a star topology.
LT
• Modular placement (detachable transformer).
• Cabinet or wall mounted (DIN rail or supplied
LV
screws).
• Free placement and orientation when installing the
controller.
NL
NO
PL
PT
RO
RU
SE
SK
1 0
Components of the controller
The illustration below shows the controller and its
components.
E
Item Description
A Uponor Smatrix Base Controller X-145
B End cap
C Transformer
D DIN rail
E Mounting material
U P O N O R S M AT R I X B A S E / B A S E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
A
D
C
B