PLUS/Base PRO CD0000021 Make sure the system contains one of the following product setups. • Uponor Smatrix Wave X-165 (controller) and Uponor Smatrix Wave I-167 (interface) • Uponor Smatrix Wave PLUS X-165 (controller) and Uponor Smatrix Wave PLUS I-167 (interface) •...
Operating mode to H/C Slave (default). See heat pump/ indoor module manual for information about how to switch between heating and cooling. • Use the Uponor Smatrix Interface (I-147 or I-167) to switch AUX1 manually between heating and cooling. AUX2...
Page 5
Pulse input: Inactive SI0000173 The Heat pump integration menu is normally hidden on the Uponor Smatrix Interface (I-147 or I-167). To activate heat pump integration : Go to menu Integration. Press and hold on the menu title Integration until HP integration: inactive appears in the list.
Page 8
Uponor GmbH Industriestraße 56, D-97437 Hassfurt, Germany Uponor reserves the right to make changes, without prior notification, 1094087 08_2018_EN to the specification of incorporated components in line with its policy of www.uponor.com Production: Uponor/MRY continuous improvement and development.