UK
Uponor Smatrix Base Thermostat Dig T-146
The thermostat shows the ambient or set temperature
CZ
on the display. Temperature settings are adjusted using
the +/- buttons on the front.
DE
Main characteristics:
•
Backlit display, dims after 10 seconds of inactivity.
DK
•
Displays Celsius or Fahrenheit.
•
Calibration of displayed room temperature.
EE
•
Heating/cooling demand indication on display.
•
Displays software version during power up
sequence.
ES
•
Setpoint range is 5 – 35 °C (maximum and
minimum setting may be limited by other system
FI
settings).
•
Room temperature regulation with use of optional
external temperature sensors.
FR
•
Displays optional temperature sensor values
if sensors are connected and relevant room
temperature regulation is activated.
HR
•
Switch between Comfort and ECO mode with
optional timer.
HU
•
Adjust ECO setback value.
Components of the thermostat:
IT
The illustration below shows the thermostat and its
components.
LT
LV
A
B
NL
Item
Description
A
Uponor Smatrix Base Thermostat Dig T-146
NO
B
Wall bracket
C
Connection terminals
PL
D
Mounting material
PT
RO
RU
SE
SK
1 4
C
D
U P O N O R S M AT R I X B A S E / B A S E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
Uponor Smatrix Base Thermostat Standard T-145
The thermostat temperature settings are adjusted using
the dial. The 21 °C position is marked on the dial.
Main characteristics:
•
Adjust temperature setpoint with large dial.
•
Setpoint range is 5 – 35 °C (maximum and
minimum setting may be limited by other system
settings).
•
Printed scale on the dial.
•
LED in lower right corner indicating, for about
60 seconds, whether a heating or cooling demand
exists.
•
Enable or disable Comfort/ECO scheduling for the
room with a dip switch on the back.
Components of the thermostat:
The illustration below shows the thermostat and its
components.
A
B
Item
Description
A
Uponor Smatrix Base Thermostat Standard T-145
B
Wall bracket
C
Connection terminals
D
Mounting material
C
D