Uponor Smatrix Base Installation And Operation Manual page 13

Uponor Smatrix Base Thermostat Prog.+RH T-148
The thermostat shows the ambient, set temperature
or relative humidity, and time on the display. Settings
are adjusted using the +/- buttons on the front. Other
programmable settings are scheduling and individual
ECO mode (on a room by room basis) etc.
Uponor recommends only using this thermostat in
systems without a timer. Because scheduling and
priority issues might occur.
Main characteristics:
• Backlit display, dims after 10 seconds of inactivity.
• Displays Celsius or Fahrenheit.
• Calibration of displayed room temperature.
• Heating/cooling demand indication on display.
• Displays software version during power up
sequence.
• Setup wizard to set time and date when installed for
the first time or after a factory reset.
• 12/24h clock for scheduling.
• Internal memory to save time and date settings
during short power outages.
• Setpoint range is 5 – 35 °C (maximum and
minimum setting may be limited by other system
settings).
• Room temperature regulation with use of optional
external temperature sensors.
• Displays optional temperature sensor values
if sensors are connected and relevant room
temperature regulation is activated.
• Programmable to switch between Comfort and ECO
modes with adjustable ECO setback value in the
room.
U P O N O R S M AT R I X B A S E / B A S E P R O · I N S TA L L AT I O N A N D O P E R AT I O N M A N U A L
• Cannot be overridden by other thermostats or
timers, when it is set to a program.
• Relative humidity limit indicated in display.
• Scheduling, pre-programmed and customizable
schedules.
• Lower indoor temperature on a room by room basis
with ECO mode.
Components of the thermostat:
The illustration below shows the thermostat and its
components.
A B
Item Description
A Uponor Smatrix Base Thermostat Prog.+RH T-148
B Wall bracket
C Connection terminals
D Mounting material
UK
CZ
DE
DK
EE
ES
C
D
FI
FR
HR
HU
IT
LT
LV
NL
NO
PL
PT
RO
RU
SE
SK
1 3