Kontron FlexATX-KBL-S-C236 User Manual page 56

Sub-Screen Function
COM1(Pci Bus0, Dev0, Func0)
Console Redirection
Legacy Console
Redirection Settings
Serial Port for Out-of-Band Management/Windows
Emergency Management Services (EMS)
Console Redirection
AMI Graphic Intel (R) GOP Driver
Output
Output Select
Protocol
Policy
PCI AMI PCI Driver Version
Subsystem
Above 4G Decoding
settings
Hot-Plug Support
Restore PCIE Registers
Don't Reset VC-TC Mapping
Network Network Stack
Stack
Configuration
CSM CSM Support
Configuration
NVMe NVMe controller and Device information
Configuration
USB Legacy USB Support
Configuration
XHCI Hand-off
USB Mass Storage Driver Support
Port 60/64 Emulation
USB transfer time-out
Device reset time-out
Resolution 100x31
Legacy OS Redirection
Resolution
Putty KeyPad
Redirection After BIOS
POST
Legacy Serial Redirection
Port
www.kontron.com
FlexATX-KBL-S-C236 – Rev. 1.1
Description
Enables/Disables extended terminal
resolution
On Legacy OS, the number of rows and
columns supported redirection
Select function key and keypad on Putty
The settings specify if bootLoader is
selected then Legacy console
redirection is disable before booting to
Legacy OS
Enable
Port is disable
Select a COM port to display redirection
of Legacy OS and Legacy OPROM
Messages
Enable/Disable Console Redirection
Shows GOP Driver Version
Output Interface
Shows AMI PCI Driver Version
Enable/Disable Above 4G Decoding
Hot-Plug Support
Enable/Disable Restore PCIE Registers
Enable/Disable Don't Reset VC-TC
Mapping
Enable/Disable UEFI Network Stack
Enable/Disable Compatibility Support
Module
No NVMe Device Found
Enables Legacy USB support
This is a workaround for OSes without
XHCI hand-off support
Enable/Disable USB Mass Storage
Driver Support
Enable/Disable Port 60/64 Emulation
The time-out value for Control, Bulk,
and Interrupt transfer
USB mass storage device start unit
// 56