Kontron FlexATX-KBL-S-C236 User Manual page 67

Sub-Screen Function
PEG Port
Configuration
DMI Link ASPM Control
DMI Extended Sync Control
DMI De-emphasis Control
DMI IOT
PEG 0:1:0 Enable Root Port
Max Link Speed
PEGO Slot Power Limit Value
PEGO Slot Power Limit Scale
PEGO Physical Slot Number
PEGO Hotplug
PEG 0:1:1 Enable Root Port
Max Link Speed
PEG1 Slot Power Limit Value
PEG1 Slot Power Limit Scale
PEG1 Physical Slot Number
PEG 0:1:2 Enable Root Port
Max Link Speed
PEG2 Slot Power Limit Value
PEG2 Slot Power Limit Scale
PEG2 Physical Slot Number
www.kontron.com
FlexATX-KBL-S-C236 – Rev. 1.1
Description
Enable/Disable the control
of Active State Power
Management on SA side of
the DMI Link
Enable DMI Extended
Synchronization
Configure the De-emphasis
control on DMI
Enable/Disable DMI IOT
Enable/Disable the Root
Port
Configure PEG 0:1:0 Max
Speed
Sets the upper limit on
power supplied by slot
Select the scale used for
the slot power limit value
Set the physical slot
number attached to this
port
PCI Express Hot Plug
Enable/Disable
Enable/Disable the Root
Port
Configure PEG 0:1:1 Max
Speed
Sets the upper limit on
power supplied by slot
Select the scale used for
the slot power limit value
Set the physical slot
number attached to this
port
Enable/Disable the Root
Port
Configure PEG 0:1:2 Max
Speed
Sets the upper limit on
power supplied by slot
Select the scale used for
the slot power limit value
Set the physical slot
number attached to this
port
// 67