Kontron FlexATX-KBL-S-C236 User Manual page 65

Sub-Screen Function
Graphics
Configuration
DLL Weak Lock Support
Pwr Down Idle Timer
Mrc Fast Boot
Lpddr Mem WL Set
EV Loader
EV Loader Delay
Graphics Turbo IMON Current
Skip Scanning of External Gfx Card
External Gfx Card Primary Display Configuration
Internal Graphics
GTT Size
Aperture Size
DVMT Pre-Allocated
DVMT Total Gfx Mem
Gfx Low Power Mode
www.kontron.com
FlexATX-KBL-S-C236 – Rev. 1.1
Description
MRC
Enable/Disable DLL Weak
Lock Support
The minimum value should
= to the worst case
Roundtrip delay +
Burst_Length. 0 means
AUTO: 64 for ULX/ULT, 128
for DT/Halo
Enable/Disable fast path
thru the MRC
Only applicable to LPDDR,
Memory Write Latency Set
selection (A is default, B will
be used if memory devices
support it)
Enable/Disable EV Loader
Functionality
Enable/Disable EV Loader 2
Second Delay
Graphics turbo IMON
current values supported
(14-31)
If Enable, it will not scan for
External Gfx Card on PEG
and PCH PCIE Ports
External Gfx Card Primary
Display Configuration
Keep IGFX enabled based on
the setup options
Select the GTT Size
Select the Aperture Size
Note: Above 4BG MMIO BIOS
assignment is automatically
enable when selecting
2048MB aperture
Select DVMT 5.0 Pre-
Allocated (Fixed) Graphics
Memory size used by the
Internal Graphics Device
Select DVMT 5.0 Total
Graphics Memory size used
by the Internal Graphics
Device
This option is applicable for
SFF only
// 65