Kontron FlexATX-KBL-S-C236 User Manual page 77

Sub-Screen Function
USB Configuration
Configured as eSATA
Spin Up Device
SATA Device Type
Topology
SATA Port6 DevSlp
DITO Configuration
DITO Value
DM Value
SATA7 J13:
Software Preserve
Port 7
Configured as eSATA
Spin Up Device
SATA Device Type
Topology
SATA Port7 DevSlp
DITO Configuration
DITO Value
DM Value
XHCI Disable Compliance Mode
xDCI Support
USB Port Disable Override
www.kontron.com
FlexATX-KBL-S-C236 – Rev. 1.1
Description
Hot Plug Supported
Enable/Disable Spin Up
Device
Identify the SATA port is
connected to solid state
drive or hard disk drive
Identify the SATA Topology
if it is default or ISATA or
Flex or Direct Connect or M2
Enable/Disable SATA Port6
DevSlp
Enable/Disable DITO
Configuration
Display DITO Value
Display DM Value
Unknown Software
Preserve
Enable/Disable SATA Port
Designates this port as Hot
Pluggable
Hot Plug Supported
Enable/Disable Spin Up
Device
Identify the SATA port is
connected to solid state
drive or hard disk drive
Identify the SATA Topology
if it is default or ISATA or
Flex or Direct Connect or M2
Enable/Disable SATA Port7
DevSlp
Enable/Disable DITO
Configuration
Display DITO Value
Display DM Value
Options to disable
compliance mode
Enable/Disable xDCI (USB
OTG Device)
Selectively Enable/Disable
the corresponding USB port
from reporting a Device
// 77