Kontron FlexATX-KBL-S-C236 User Manual page 64

Sub-Screen Function
RH Activation Probability
Exit on Failure (MRC)
MC Lock
Probeless Trace
Enable/Disable IED (Intel Enhanced Debug)
Ch Hash Support
Ch Hash Mask
Ch Hash Interleaved Bit
VC1 Read Metering
VC1 RdMeter Time Window
VC1 RdMeter Threshold
Strong Weak Leaker
Memory Scrambler
Force ColdReset
Channel A DIMM Control
Channel B DIMM Control
Force Single Rank
Memory Remap
Time Measure
www.kontron.com
FlexATX-KBL-S-C236 – Rev. 1.1
Description
Used to adjust MC for
Hardware RHP
Exit on Failure for MRC
training steps
Enable/Disable capacity to
lock or not MC registers
HD Port, GDXC IOT/MOT od
Disable
Intel Enhanced Debug
requires 4MB SMM memory
Enable/Disable Channel
Hash Support
Set the BIT(s) to be included
in the XOR function
Select the BIT to be used for
channel interleaved mode
Enable/Disable VC1 Read
Metering Feature (RdMeter)
VC1 Read Metering Time
Window: time window over
which VC1 read request
counter is tracked
VC1 Read Metering
Threshold: threshold of
counter within time window
Value for Strong Weak
Leaker
Enable/Disable Memory
Scrambler
Force ColdReset OR Choose
MrcColdBoot mode, when
coldboot is required during
MRC execution
Channel A DIMM Control
Support – Enable or Disable
Dimms on Channel A
Channel B DIMM Control
Support – Enable or Disable
Dimms on Channel B
When enabled, only Rank 0
will be used in each DIMM
Enable/Disable Memory
Remap above 4GB
Enable/Disable printing of
the time it takes to execute
// 64