Kontron FlexATX-KBL-S-C236 User Manual page 83

Sub-Screen Function
CLKRUN# logic
Serial IRQ Mode
Port 61h Bit-4 Emulation
State After G3
Port 80h Redirection
Enhance Port 80h LPC Decoding
Compatible Revision ID
PCH Cross Throttling
Disable energy reporting
Enable TC0 Timer
Pcie Pll SSC
Unlock PCH P2SB
PMC READ DISABLE
Flash Protection Range Registers (FPRR)
SPD Write Disable
Chipset Init HECI Message
Bypass Chipset Init sync reset
www.kontron.com
FlexATX-KBL-S-C236 – Rev. 1.1
Description
ACPRESENT PullDown when
DeepSx or G3 exit
Enable the CLKRUN# logic
to stop the PCI clocks
Configure Serial IRQ Mode
Emulation of Port 61h bit-4
toggling in SMM
Specify what state to go to
when power is re-applied
after a power failure
Control where the Port 80h
cycles are sent
Support the word/dword
decoding of port 80h behind
LPC
Enable/Disable the PCH
Compatible Revision ID
feature
Enable/Disable PCH Cross
Throttling feature
Enable/Disable energy
reporting feature
Enable/Disable TC0 timer
Pcie Pll SSC percentage
Unlock PCH P2SB SBI and
configuration space by PSF
This is TEST feature for PMC
XRAM read
Enable Flash Protection
Range Registers
Enable/Disable setting SPD
Write Disable
Enable/Disable Chipset Init
HECI Message
Setting this option to skip
ChipsetInit sync reset
// 83