Layer 2 Filter - Alcatel-Lucent CellPipe 7130 Manual

Firewall Setup
............................................................................................................................................................................................................................................................
Select
Figure 8-3 UPnP window
Table 8-3
Table 8-3 Field descriptions
Field
UPnP
UPnP Log
ReadOnly Mode
Apply Changes

Layer 2 Filter

Select
Figure
............................................................................................................................................................................................................................................................
3EQ-10422-AAAA-TCZZA
Edition 01 February 2011
in the
UPnP Firewall Setup
describes the fields of the UPnP window.
in the
Layer 2 Filter
8-4.
menu to access the UPnP window; see
Description
Select Enable to enable the UPnP function. Select
Disable to disable the UPnP function.
Select Enable to enable the logging activities.
Select Disable to disable the logging activities.
Select Enable to turn on the read-only mode. Select
Disable to turn off the read-only mode.
In read-only mode, users are unable to
Note:
change port forwarding settings or any other UPnP
enabled application settings.
Click to save your changes.
menu to access the Layer 2 Filter window; see
Firewall Setup
Layer 2 Filter
Figure 8-3.
8 - 5